Filter
Top Products
12 AHU CONTROL KIT
Supplementary function of wired remote controller
Desired humidity control
Press the Function Setting
button.
1
Set the Function Code of
Display ‘C’ to 01.
2
Press the Up/Down button to set
the target humidity.
3
Press the OK/CLEAR button to
decide the desired humidity.
4
C
Display C: Desired humidity
(Function set by code)
* Code 01: Current humidity
: Desired humidity
Function
Code
Setting
(Example)
<Current humidity: 50%>
* Desired humidity can be controlled in the range
of 40~60% by 5% increment.
* Default humidity is set to 50%.