Filter
Top Products
FOCUS MODE SET
18
2-4. ZOOM END Set
This function is for selection of zoom end position.
A) Select the “ZOOM END” in submenu using Tele/Wide key.
B) Set the Zoom end mode using Focus key.
LVC-C503/C513/C533/C553: from (Zoom Start + 1) to X54
LVC-C500/C510: from (Zoom Start + 1) to X324
2-5. ZOOM SPEED Set
This function is for selection of zoom speed.
A) Select the “ZOOM SPEED” in submenu using Tele/Wide key.
B) Set the Zoom speed, Slow, Middle , Quick using Focus key.
2-6. ZOOM TRACKING MODE Set
This function is for selection of zoom tracking mode.
A) Select the “ZTRK” in submenu using Tele/Wide Command,
B) Set the Zoom tracking mode to Auto or Manual.
* Zoom tracking means focused zooming state.