Filter
Top Products
3
2.0 GENERAL INFORMATION
This appliance is a high efficiency, unvented, flame effect gas heater.
It provides radiant and convected warmth both efficiently and safely
utilizing the latest type catalytic convertor burner technology. The
appliance does not require a flue system of any type as the catalytic
converter cleans the flue products to provide a complete combustion
system, which is intrinsically safe.
3.0 PACKAGING LIST
Quantity Description
1 Firebox and Burner Assembly
1 Installation and Operation Instructions
1 Decorative Glass Facia
4 Decorative Spring-Loaded Corner Posts
1 Screw and Wall Plug Pack
1 Rubber Grommet
1 Fitting Template
4.0 APPLIANCE SPECIFICATIONS
Gas Type Natural Gas Propane/LPG
Gas Inlet Pressure
Max.
Min.
10.5” w.c.
6” w.c.
13” w.c.
11” w.c.
Regulator Pressure Setting 5” w.c. 10” w.c.
Max Energy Input 6,825 BTU/hour 5,800 BTU/hour
Minimum Energy Input 3,412 BTU/hour 3,412 BTU/hour
Pilot Energy Input 560 BTU/hour 560 BTU/hour
Burner Pressure High
(manifold) Low
3.5” w. c.
0.8” w.c.
7” w.c.
2.6” w.c.
Main burner flow restrictor
(burner orifice)
1.30mm (0.051”) 0.80mm (0.031”)
Oxypilot SIT/Bray 9082 SIT/Bray 9284
Gas Inlet Connection 3/8” NPT 3/8” NPT
Ignition Piezo spark Piezo spark
Spark Gap 1/8” - 3/16” 1/8” - 3/16”
Please see Data Plate affixed to appliance for current data. This appliance is for use
only with the gas type, and at the pressure stated on the appliance Data Plate.
Table 1
CONGRATULATIONS ON THE PURCHASE OF YOUR NEW
GAS APPLIANCE MANUFACTURED BY LENNOX HEARTH
PRODUCTS.
When you purchased your new gas fireplace, you joined the ranks of
thousands of individuals whose answer to their home heating needs
reflects their concern for efficiency and our environment. We extend
our continued support to help you achieve the maximum benefit and
enjoyment available from your new gas fireplace. It is our goal at Lennox
Hearth Products to provide you, our valued customer, with an appliance
that will ensure years of trouble-free warmth and pleasure.
Thank you for selecting a Lennox Hearth Products gas fireplace as the
answer to your supplemental home heating needs.
Sincerely, All of us at Lennox Hearth Products
TABLE OF CONTENTS
Section Contents Page No.
1.0 Safety And Warning Information
. . . . . . . . . . . . . 2
2.0 General Information
. . . . . . . . . . . . . . . . . . . . . . . 3
3.0 Packaging List
. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
4.0 Appliance Specifications
. . . . . . . . . . . . . . . . . . . 3
5.0 Unpacking the Appliance
. . . . . . . . . . . . . . . . . . . 4
6.0 Burn-in Period
. . . . . . . . . . . . . . . . . . . . . . . . . . . 4
7.0 Codes, Massachusetts & New York
. . . . . . . . . . . 4
8.0 Combustion And Ventilation Air
. . . . . . . . . . . . . . 5
9.0 Site Requirements
. . . . . . . . . . . . . . . . . . . . . . . . 6
10.0 Preparing The Appliance
. . . . . . . . . . . . . . . . . . . 7
11.0 Mounting The Appliance
. . . . . . . . . . . . . . . . . . . 7
12.0 Checking The Burner
. . . . . . . . . . . . . . . . . . . . . . 8
13.0 Connecting A Gas Line
. . . . . . . . . . . . . . . . . . . . 8
14.0 Checking The Gas Connections
. . . . . . . . . . . . . . 9
15.0 Gas Pressure Check
. . . . . . . . . . . . . . . . . . . . . . . 9
16.0 Spark Gap
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
17.0 Fitting The Glass Facia
. . . . . . . . . . . . . . . . . . . . . 10
18.0 Briefing The Customer
. . . . . . . . . . . . . . . . . . . . . 10
19.0 Servicing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
20.0 Servicing The Burner
. . . . . . . . . . . . . . . . . . . . . . 11
21.0 Pilot Assembly
. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
22.0 Catalysts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
23.0 Testing For Firebox Leakage
. . . . . . . . . . . . . . . . 12
24.0 Cleaning
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
25.0 Lighting Instructions & Turning Off Appliance
. . . 13
26.0 Troubleshooting Guide
. . . . . . . . . . . . . . . . . . . . . 14
27.0 Replacement Parts List
. . . . . . . . . . . . . . . . . . . . 15
28.0 Positioning Of Field Assembled Parts
. . . . . . . . . 16
29.0 Specifications
. . . . . . . . . . . . . . . . . . . . . . . . . . . 17
30.0 Product Reference Information
. . . . . . . . . . . . . . 18
These heaters are fitted with a specially designed pilot utilizing an
oxygen depletion sensor (ODS) which responds to the amount of
oxygen available in the room and shuts the heater off before the
oxygen level drops below 18%. It must not be adjusted or put out
of operation. If replaced then manufacturers original parts must be
used. The pilot can be relit only when fresh air is available. Refer to
the Combustion and Ventilation Air section.
The appliance is designed to fit various types of situations as listed
in the Installation Requirements.
This appliance is factory set for operation on the gas type, and at the
pressure stated on the appliance rating plate.
Read all these instructions before commencing installation. All instruc-
tions must be left in the possession of the user for safekeeping.