Filter
Top Products
Owner's Manual 17
ENGLISH
2
3
1
To raise the temperature.
To lower the temperature.
Cold HotWarmCool Proper
ON OFF
SET
CANCEL
Operating Instructions
Auto Operation Mode
Press the Start/Stop Button.
Press the Operation Mode Selection Button.
Press the Operation Mode Button on the remote controller.
Select Auto Dry Operation.
Set the temperature upper or lower than the standard temperature.
The temperature can be set within a range of by 1 level.
(This indication will be shifted to the initial Auto Mode Display state after 4 seconds.)
During Auto Operation
• It is impossible to switch the indoor fan speed because of being already set to the best conditioner
by fuzzy rule.