Filter
Top Products
—19—
3.2.3 UNIT INSTALLATION
1. Remove the shipping screw from the ventilation door.
(See Fig. 17)
2. Remove the front gille by pulling it out at the bottom to
release it, then lift it up along the unit top front.
(See Fig. 18)
3. Slide the unit into the wall sleeve and secure with 6 screws
through the unit flange holes. (See Fig. 19)
4. Reinstall the front grille by hooking the top over the unit top,
then pushing it in at the bottom. (See Fig. 20)
Figure 17
Figure 18
Figure 19
Figure 20