Filter
Top Products
—18—
3.2.1 PREPARATION OF SLEEVE
ASSEMBLE THE WALL SLEEVE
• Raise the sleeve side panels to upright position as shown on
the right.
• Place sleeve upper on top of side panels.
• Fasten the four screws as shown on the right.
• Assemble drain kit.
• Fasten this assembly to the each side of the wall sleeve as
shown on the right.
• Assemble the outdoor grille and fasten the 4 screws as
shown on the right.
3.2.2 PREPARATION OF THE FRONT GRILLE
Carefully remove shipping tape, if there is any, from the front
grille.
SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
I
N
D
O
O
R
IN
D
O
O
R
INDOOR
I
N
D
O
O
R
I
N
D
O
O
R
14
12
11
Shipping tape
I
N
D
O
O
R
3.2 SUGGESTED TOOL REQUIREMENTS
SLEEVE HARDWARE
NUMBER NAME OF PARTS Q’TY
SLEEVE LOWER 1
SLEEVE UPPER 1
SCREW 4
OUTDOOR GRILLE 1
DRAIN KIT 1