Lenoxx Electronics G24MCE Furnace User Manual


 
Page 2
G24MCE Parts Identification
UPFLOW POSITION DOWNFLOW POSITION
1
2
3
4
5
6
8
1
2
3
4
5
6
8
1 - COMBUSTION AIR FAN
2 - PRESSURE SWITCH
3 - GAS VALVE
4 - CAPILLARY TUBE LIMIT
5 - BURNERS
6 - CONTROL BOARD
7 - HIGH LIMIT
8 - MAIN FAN
7
7
WARNING
This appliance must be earthed.
WARNING
This product contains glass fibre insulation.If inĆ
sulation is disturbed during installation, mainteĆ
nance or repair, persons may be exposed to irritaĆ
tion to the skin, eyes and lungs. Tears in the insulaĆ
tion should be repaired straight away.
WARNING
If overheating occurs or if gas supply fails to shut
off, shut off the manual gas valve to the appliance
before shutting off electrical supply.
WARNING
Do not use this furnace if any part has been underĆ
water. Immediately call a qualified service techniĆ
cian to inspect the furnace and to replace any part
of the control system and any gas control which
has been under water.
CAUTION
Before attempting to perform any service or mainteĆ
nance, turn the electrical power to unit OFF at isolaĆ
tor switch.
IMPORTANT
Any additions, changes, or conversions required in
order for the appliance to satisfactorily meet the apĆ
plication needs must be made by a Lennox service
technician using factory specified and approved
parts.