Filter
Top Products
ENGLISH
5
1
2
Insert Pull
Remote Control Preparation
How to mount onto a wall
To insert the remote control to the holder.
How to insert batteries
Remove the cover from the
back of the remote controller.
• Slide the cover according to
the arrow direction.
Insert two batteries.
• Be sure that the (+) and (-)
directions are correct.
• Be sure that both batteries
are new.
Re-attach the cover.
• Slide the cover into back
position.
• Do not use rechargeable
batteries such batteries
are different from
standard dry cells in
shape, dimensions, and
performance.
• Change the batteries with
a new one if the remote
control does not work
properly after using for an
extended length of time.
Use the screws to secure the holder to the wall or attach the holder side of indoor
unit.