Filter
Top Products
ComfortSenset Model L7742U Touch Screen 7−Day Programmable Thermostat
Page 7
Schedule tabĊProgramming
If backlight is not on continuous, press the screen anywhere to turn on
the backlight. Press the SCHEDULE tab along the top of the screen.
The display changes to programming mode (figure 4) and shows the
current settings.
EVENTS DAILY 2 OR 4ĊThe thermostat may be programmed for two
or four (default) events per day. The names for the events are: WAKE,
LEAVE, RETURN, and SLEEP. The selected time for an event to occur
is based on when you want the event to begin. Four events (default) are
common for working households. To change to two events per day, see
page 10. When set for two events per day, the display would appear as:
WAKE (or SLEEP) PERIOD BEGINS".
WAKE PERIOD BEGINS
5:OOAM
Figure 4. Schedule Screen
Programming may be performed in groups of days or individual days,
as follows:
A MON TO SUN − allows every day to be set the same.
B MON TO FRI (weekday programming) and
SAT TO SUN (weekend programming).
C MONDAY through SUNDAY allows individual days of the
week to be programmed separately.
NOTE − After using one of the groups of days described above, the
program allows you to subsequently change individual days to suit your
needs.
To get to the different groupings of days, press EDIT, then press NEXT
repeatedly to scroll to the desired grouping.
Programming Complexity
The programming process for groups of days or individual days is the
same, except in the amount of times required to go through the process.
Full WeekĊThe least complex program is the full week MON TO
SUN" program, wherein the events for every day of the week are the
same. This requires one time through the event programming process.
Work WeekĊNext in complexity to the full week program is the work
week program wherein the events are set for a typical work week (MON
TO FRI) and different events are set for the weekend (SAT TO SUN).
This requires two times through the events.
Day by DayĊMost complex because this requires going through the
programming process 7 times.