Filter
Top Products
22
VILLA VISTA™ COMPONENTS LISTS
Installation Accessories
Description Cat./ Part No.
Decorative Cast Iron Door (Required - Order Separately)
Arch Shape Door, Gold Plated H3279
Arch Shape Door, Black H3280
Arch Shape Door, Brushed Nickel H3281
Gravity Kit
Gravity Kit: Complete double duct system includes: 2
90° elbows, 2 telescopic lengths, 2 grill supports & 2
black grills, 2 fireplace adaptors
7B30ZK-1
Gravity Kit Accessories
Black grill with support (set of 2) 7B30ZO
Brass grill (for 7B30ZK-1) 7B30ZGB
Elbow 90°, 8" dia. I.D. 7B26ZE90
Elbow 45°, 8" dia. I.D. 7B26ZE45
Telescopic Length, 8" dia. I.D. (15" - 26") 7B26ZLA
Adjustable Length, 8" dia. I.D. (2" - 5") 7B26ZL2A
Radiation Shield, 8" I.D. 7B26ZR
Length 5 ft., 8KL5 8KL5
Length 4 ft., 8KL4 8KL4
Length 3 ft., 8KL3 8KL3
Length 2 ft., 8KL2 8KL2
Length 1 ft., 8KL1 8KL1
Outside Air Kit (Required - Included with Fireplace)
outside Air Coupler to Connect Outside Air UZI to Fireplace,
UZIAD
UZIAD
Outside Air Ducting - Includes 4 ft. Insulated Flex x 10 ft.
long, UZI
UZI
Fireplace Options
Description Cat./ Part No.
Del Sol Louver Kit DEL SOL
Diamante Louver Kit DIAMANTE
Fiori Louver Kit FIORI
Luna Louver Kit LUNA
Strada Louver Kit STRADA
Panel for Clean Face Option BPCF
Blower UZY5
Blower Motor Speed Control VRUW
Rigid Firescreen BPZN
Fireplace Model VILLA VISTA - Approved Venting Components
7" Diameter Chimney - Model ASHT+, S2100+, HT6000+, HT6103+ or ACBI
manufactured by Security Chimneys International only.
7" Diameter Chimney for Relining Masonry Chimneys - TUBINOX chimney (or
PROJET SS), 7" diameter with adaptor for installation in a masonry chimney.
Notes:
j(Projet NovaTemp™) HT6000+ equivalent to S2100+
k(Projet NovaTemp™) HT6103+ equivalent to ASHT+
lThis appliance is equipped with the ASHT Chimney Adaptor. When other
chimney is used, a chimney adaptor for the chimney will be required.
mChimney Adaptor (S2100+ / HT6000+) for CANADA ONLY - If you want to
install a S2100+ / HT6000+ chimney, an adaptor is available (6UCA).
nAC Chimney is Not recommended at elevations above 4000 feet or in cold
climates, where temperatures fall below 32° F (0 ° C). When using AC chimney,
an ACBI7SBA starter section must be used before installing an elbow. When
an offset is needed immediately off the top of the fireplace, an elbow starter
section is available (ACBI7SBA30) is available.