Lennox Hearth H6963 Indoor Fireplace User Manual


 
2
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Figure 3
CAUTION: THE TELEVISION ASSEMBLY IS HEAVY. PLEASE CLEAR
THE AREA IN FRONT OF THE FIREPLACE BEFORE ATTEMPTING TO
SWING THE UNIT INTO POSITION. THE UNIT MUST SWING
SLIGHTLY PAST HORIZONTAL TO LATCH. WE SUGGEST THAT TWO
PEOPLE PERFORM THIS STEP.
Step 11. Lift the assembly upwards to free it from the screen rods.
Step 12. Lay the television tray assembly onto a flat surface. Use a
cardboard protector to protect the tray from marring.
Step 13. Undo the straps to remove the existing TV.
INSALLING THE REPLACEMENT TV
Step 1. Open the television box and remove all packing materials from
the unit. Remove the television and place it beside the tray.
Note: The Television is provided with a remote control. The fireplace
does not require this remote control. It may be discarded.
Drape the straps to the side of the tray assembly, out of the way as
much as possible.
The television will lay face down on the tray as shown in
Figure 4
.
The television is oriented centrally on the tray with the bottom
against the base support. The straps are then doubled over the unit
as shown in
Figure 4
and drawn very taut. Cross strap both sides
tightly (with straps provided inside carton support package) to
prevent the television from slipping out of position.
Note: The TV screen protrudes below the bottom frame of the tray
assembly. Be sure to support the tray assembly above the work surface
to protect the TV screen. Use the spacers from the TV box to do this.
Lift the assembly up onto its base (as shown in
Figure 3
) and verify
the security of the straps. Use the handles on each side of the unit to
lift and hold the unit.
CAUTION: THE SECURITY OF THE STRAPS IN THIS ASSEMBLY IS
IMPORTANT SO THAT THE INSTALLATION STEPS THAT FOLLOW
CAN BE PERFORMED SAFELY.
Figure 4
Television
(Face Down)
Television
Straps
Secure Television
Straps Tightly
Tray
Assembly
Base Support
Television
Base
Handles
Spacers
Use
Center Slot
Cross
Strap
Screen Rod
Hand Holds
Engagement Hooks
Top Receptacle
Power Cord
Tabs
Detail Of
Top Receptacle