Lennox Hearth ENRCVDE Indoor Fireplace User Manual


 
10
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Deluxe Remote Control System
The Model RCL-T (Deluxe) Remote Control
System has all of the features of the standard
system along with an added easy to read LCD
screen which presents access to many en-
hancements, including; battery power level in-
dicator, timer, mode of operation, thermostatic
display including room temperature in either
metric of English units, flame indicator and
clock. Fully programmable, the Model RCL-T
allows for virtual command over nearly all
operational and temperature variables, using
the hand held remote control transmitter.
The Model RCL-T (Deluxe) remote control sys-
tem is installed in the same manner as the
standard system, may be operated with elec-
tronic and millivolt systems with either natural
or propane gas. The RCL-T comes complete
with detailed operating instructions.
Remote Control System (Deluxe) H0251 RCL-T
ACCESSORY COMPONENTS CONTINUED
Touch-Up Paint Kit (Charcoal) 90L74 TPK-C
Touch-Up Paint Kit (Tan) 98K67 TPK-T
Touch-Up Paint Kit
Repair of minor scratches and discoloration of the
appliance charcoal painted cabinet surfaces may
be accomplished with the touch-up paint kit.
Flame Modulating Remote Control
Flame Modulating Remote Controls were de-
veloped to provide a safe, reliable and user-
friendly remote control system for appli-
ances equipped with a Millivolt Gas Valve. A
detailed set of instructions are included with
each remote.
Flame Modulating Remote Control
Natural Gas H0301 RCL-MN
Flame Modulating Remote Control
LP/Propane Gas H0302 RCL-ML
Remote Control System (Standard) H0249 RCL
Standard Remote Control System
The Model RCL (Standard) Remote Control
System, features a simplistic on/off control
function for the fireplace. This model includes
a hand-held transmitter, a remote receiver
with wall-mount coverplate and all hardware
required to install the unit. The remote re-
ceiver can be wall or hearth mounted.
The transmitter has ON and OFF functions that
are activated by pressing either button on the
face of the transmitter. When a button on the
transmitter is pressed, a signal light illuminates
briefly to verify that a signal has been sent.
The Model RCL is designed to operate with all
millivolt ignition systems, as well as electronic
ignition systems. It may be installed with use for
either natural or propane gas appliances. The
RCL offers ease of installation and allows you to
execute on-off commands to the fireplace effort-
lessly with one simple motion.
The Model RCL comes complete with detailed
operating instructions.