11
8. Place the glowing embers on the burner as shown in Figure 29.
One package of ember material has been included with this log set
You will not need to use the entire bag.
IMPORTANT: The quantity and placement of the ember material can
affect insert performance therefore it is very important that it be placed
as shown in Figure 29.
a. Unpackage and divide the fine ember material (mineral wool) into
dime-sized fluffy pieces.
b. Distribute the pieces over the top of the front burner ports, filling the
area in front of the forward logs.
Figure 29
Embers
LOGS, VERMICULITE AND EMBERS - Model EDVI35
Figure 28
Top Right Log
Figure 30
Vermiculite
Rear Log
Center Left Log
Top Left Log
Front Right Log
Front Left Log
Front Center Log
Top Right Log
Figure 31
WARNING
If logs are not installed according to the directions shown here, flame impingement and improper com-
bustion could occur and result in soot and/or excessive production of carbon monoxide (CO) - a colorless,
odorless, toxic gas.