Lennox Hearth APDML35C Indoor Fireplace User Manual


  Open as PDF
of 4
 
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Figure 4 - ELDV Models
Doorframe
Bracket
Locate the doorframe
bracket on the lower
front of the doorframe and
lock it behind the cabinet bottom
flange as shown here.
Tabs engage into
slots (both sides)
Tab
Doorframe
Fireplace
Slot
Locate slot on
each side
3
d. ELDV Models - Locate slots on each side of fireplace
(see Figure 4).
e. ELDV Models - Hold the top of the door frame slightly away from
the fireplace front while aligning the tabs on door frame with the
corresponding slots on fireplace. While the tabs engage, slide the
top of the door frame so that it goes over the top of glass door
assembly (see Figures 4 & 7).
f. MPLDV Models - Locate the top of the door frame and identify the
return flange. Position the door frame in front of the glass door
assembly and hook the door frame over it at the top. Let the door
frame fall into place. Position the door frame right to left and use
the clips to engage the door frame and glass door assembly, to
lock it (lower left and right corners of the opening). The clip will
slide between the metal frame of the glass door assembly and the
glass. Refer to Figures 5 and 6.
*g. Connect the switch wires to the ON/OFF switch. Press the ON/OFF
switch down into the switch mounting bracket on door frame until
it locks in place (see Figure 8).
Hook Doorframe
Over Glass door
Figure 5 - MPLDV Models
Figure 6 - MPLDV Models
Door Clip In
Place Between
Doorframe And
Glass Door
Detail Showing
Glass Door Clip
Being Put Into
Place Between
Doorframe And
Glass Door
 previous