Filter
Top Products
• Do not submerge the units in water.
• Immediately remove all low powered batteries to avoid leakage and
damage. Replace only with new batteries of the recommended type.
• Do make any repair attempts to the units. Return it to their original point
of purchase for repair by a qualified engineer. Opening and tampering
with the units may invalidate their guarantee.
• Do not expose the units to extreme and sudden temperature changes,
this may lead to rapid changes in forecasts and readings and thereby
reduce their accuracy.
SPECIFICATIONS:
Temperature measuring range:
Indoor : +14.2°F to +139.8°F with 0.1°F resolution
-9.9ºC to +59.9ºC with 0.1ºC resolution
(“OFL” displayed if outside this range)
Outdoor : -21.8°F to +157.8°F with 0.1°F resolution
-29.9ºC to +69.9ºC with 0.1ºC resolution
(“OFL” displayed if outside this range)
Relative humidity measuring range:
Indoor and outdoor : 1% to 99% with 1% resolution
(“- -” displayed if outside this range)
Indoor temperature checking interval : every 15 seconds
Indoor humidity checking interval : every 20 seconds
Outdoor temperature reception : every 5 minutes
Sensor checking interval : every 1 minute
Power supply:
Weather Projection Station : 3 x AA, IEC LR6, 1.5V
Thermo-hygro sensor : 2 x AA, IEC LR6, 1.5V
Battery life cycle : approximately 12 months, less if the
projection is used) (Alkaline batteries
recommended)
Dimensions (L x W x H)
Weather Projection Station : 3.97” x 2.48” x 7.16” /
101 x 63 x 182mm
Thermo-hygro sensor : 2.36” x 2.87” x 4.76” /
60 x 73 x 121mm
LIABILITY DISCLAIMER
• The manufacturer and supplier cannot accept any responsibility for any
incorrect readings and any consequences that occur should an
inaccurate reading take place.
• This product is not to be used for medical purposes or for public
information.