Filter
Top Products
KA300TX Transmitter, program the KA300RX with one KA300TX.
• Install the KA300TX on the existing sensors and KA300RX on the wall.
• Perform a test on each KA300TX,
USING ALARM MONITOR WITH WEATHER ALERT RADIO.
• Set operation code for the KWA300TX (weather alert transmitter).
• Select channel 3 on KWA300TX and record it into the label on
channel LED of KA300RX.
•Turn on KWA300TX.
• Repeat code learning process if the operation code is different from
the previous house code.
• Plug the KWA300TX to the weather alert through the external
output pin.
•Test the weather alert siren to make sure the unit is set up properly.
3: SETUP OPERATION MODE (CONT.)
11
INSTALL THE KWA300TX
ON THE WEATHER
ALERT RADIO
WEATHER ALERT RADIO
EXTERNAL OUTPUT