Filter
Top Products
- 23 -
Items supplied
Cyclone Vacuum cleaner
Suction hose
Telescopic tube
Floor tool
Accessory holder
Crevice tool
Upholstery brush
Operating instructions
Order card
Technical data
Power supply: 220–240V
~
/50Hz
Power rating: min: 1400W
max: 1800W
Protection class: II
Appliance description
1
Dust collector carrying grip
2
Unlock button for housing lid
3
Exhaust filter cover
4
Storage bracket for floor tool
5
On/Off switch
6
Vacuum cleaner carrying grip
7
Suction power regulator
8
Foot button for power cable rewind
9
Power cable with power plug
0
Storage bracket for floor tool
q
Housing cover
w
Selector switch for carpet/hard surface
e
Floor tool
r
Storage hook
t
Dust collector
z
Suction pipe connector
u
Height adjuster for telescope tube
i
Storage hook
o
Telescope tube
p
Accessory bracket
a
Suction hose
s
Secondary air regulator
d
Hand grip
f
Crevice tool
g
Upholstery brush (rotatable through 360°)
Unpacking and assembly
Unpacking
• Unpack the appliance and the accessories and
check that all listed items are available.
Assembly
Attention!
Assemble the appliance with the plug
9
disconnec-
ted from the power supply. The appliance could be
inadvertantly switched on.
1. Insert the suction pipe connector
z
into the
socket on the vacuum cleaner until the locking
device engages.
2. Insert the hand grip
d
into the upper end of
the telescope tube
o
until it is firmly seated.
3. Place the desired tool (floor tool
e
, crevice
tool
f
or upholstery brush
g
, see chapter
„Changing tools“) on the lower end of the
telescope tube
o
.
4. Adjust the telescope tube
o
to the desired
length: Press the height adjustor
u
down. Pull
the telescope tube
o
apart on the hand grip
d
. When you have the desired length release
the height adjuster
u
. Pull the telesopic tube
o
a little further until it audibly engages.
The Cyclone Vacuum Cleaner is now ready for use.
IB_KH1410_E2687_GB_LB4+5 21.01.2008 10:22 Uhr Seite 23