Filter
Top Products
-6-
7. CONNECT PUSH BUTTON
Put large flange through hole in lid. Screw retaining ring onto
flange. Turn the screw inside the push button flange to secure
tank lid to flush valve assembly. Make certain that the flush
valve assembly is adjusted high enough that the button
touches the assembly. Put green and white push
rods into corresponding holes and trim flush with the top of
the flange. Install flush buttons.
See 6 .
See Fig. 7 . See Fig. 8 .
7.
6
78
£
Fig. #7
7
7
8
1
2
5
3
4
1&1 1/2 tour
6
1037406-T01-A