Filter
Top Products
-3-
3. SELECT P-TRAP OR S-TRAP
to installation
your toilet according to the drain and shut-off valve's
Roughing-in dimensions.
2. ASSEMBLE TANK BOLTS&WASHERS
Slip bolt heads into mounting plate on bottom of tank. Place
large foam washer on base of flush valve.
Place tank on bowl and attach with nuts and washers from
under bowl.
See Fig. #2a.
See Fig.#2b.
NOTE:
Do not use white cement or high lime content
cements to install this toilet. The expansion of cement due to
a rise in temperature may make the toilet crack or cause
damage. Kohler is not responsible for any damage caused by
installation with the use of cement.
2.
2a
2b
£
£
3.
£
Fig.#2a
2a
Fig.#3a
3a
Fig.#3b
3b
S-trap installation
P-trap installation
Fig.#2b
2b
1
0
0
120
1
8
0
255/305
50
255/305
1
0
0
120
50
180
1037406-T01-A