Filter
Top Products
4. Install the Battery
CAUTION: Risk of product damage. Verify the solenoid wire
and sensor cable are not being pinched during assembly.
Position the sensor cable from the faucet up through the bottom
of the battery holder.
Connect the sensor cable from the faucet to the female connector
in the battery holder.
Insert the battery into the battery holder with the concave edge
toward the battery holder, then close the battery clip.
Connect the battery holder connector to the solenoid connector
with the arrows pointing directly toward each other.
Connect the battery holder to the valve body assembly.
Battery Holder
Battery
Holder
Battery Clip
Battery
Connect with the arrows pointing
toward each other.
Valve Body
Assembly
Battery
Holder
Connector
Solenoid
Connector
Sensor Cable
1056542-2-B 6 Kohler Co.