Filter
Top Products
2
TABLE OF CONTENTS
INSTALLATION REQUIREMENTS................................................2
INSTALLATION INSTRUCTIONS..................................................2
FAUCET USE ..................................................................................4
FAUCET CARE................................................................................4
TROUBLESHOOTING ....................................................................5
REPLACEMENT PARTS LISTS .....................................................6
WARRANTY ....................................................................................8
INSTALLATION
REQUIREMENTS
Tools and Parts
Gather the required tools before starting installation. Remove
parts from carton. Check that all parts are included.
Tools Needed:
Parts Supplied:
All models:
Model series KKFV01SP and KKFV01PP:
Location Requirements
IMPORTANT:
■ Observe all governing codes and ordinances.
■ Check location where faucet will be installed. Proper
installation is your responsibility. Make sure you have
everything necessary for installation. It is the responsibility of
the installer to comply with installation specifications and with
state and local plumbing codes.
■ Keep faucet and water lines leading to faucet from freezing to
avoid damage.
■ The faucet requires a 1³⁄₈" (3.5 cm) diameter opening in sink
or countertop. If there is no hole for mounting, it is
recommended that you contact a qualified installer to drill the
hole for your installation in a sink deck or countertop.
NOTE: The thickness of the sink or countertop must not
exceed 1³⁄₄" (4.4 cm).
■ Hot and cold water supply lines must be available. If the
water lines are not available, it is recommended that you
contact a qualified plumber to install the necessary piping.
■ Faucet hoses are equipped with compression type seals and
do not require sealing compound to keep from leaking.
■ As with all metal objects, follow proper handling techniques.
INSTALLATION
INSTRUCTIONS
IMPORTANT:
■ It is recommended that a qualified plumber/installer install the
faucet. The faucet installation must comply with national and
local plumbing codes and ordinances.
■ The faucet should be examined for damage prior to
installation. Do not install a damaged faucet. Instead, return
the faucet to the dealer from whom you purchased it.
Install the Faucet
IMPORTANT:
■ Before installing the faucet, flush water supply pipes
thoroughly. Shut off water supply valves.
■ Follow the installation instructions specific to your faucet
model.
Models KKFV01SP and KKFV01PP
1. Remove the threaded collar, flat metal washer, and flat rubber
washer from faucet.
NOTE: Do not remove the rubber O-ring from the bottom of
the faucet base.
2. Insert faucet into sink or countertop.
■ Feed tubing through the hole in the sink or countertop.
■ Insert threaded shank into the hole.
NOTE: Make sure the rubber O-ring in the channel at the
bottom of the faucet base is firmly in place.
■ Adjustable wrench
■ Basin wrench (optional)
■ #2 Phillips screwdriver
■ Slip joint pliers
■ Faucet assembly
■ ⁵⁄₆₄" Allen wrench
■ Mounting assembly
-Rubber O-ring
-Flat rubber washer
-White triangular support
-Flat metal washer
-Threaded collar
■ Weights (2) ■ Check valve assembly
-fiber seals (2)
A. Rubber O-ring
B.Flat rubber washer
C. Flat metal washer
D. Threaded collar
A
B
C
D