Filter
Top Products
Cause: Drain side of faucet airgap (3/8" black I Correction: Inspect and eliminate restriction or plug. Refer to installation
tubing) plugged, restricted or incorrect- I instructions for proper drain connection. See page 9.
ly connected to drain point. I
Cause: Battery dead. Correction: Replace with new battery. See page 21.
Cause: Battery installed incorrectly. Correction: Install battery correctly. See pages 13 or 21.
] :1
_em_ __e push_onn_
Cause: Tubing not cut square. Correction: Cut tubing square. See page 1,4.
Cause: Tubing not pushed in all the way. Correction: Push tubing in all the way. See page 14.
Cause: Tubing nicked. Correction: Remove tube from connection. Remove nicked portion by cutting
tube to shorter length. Re-insert in connection. See page 14.
If removing the drain line, leave in place the elbow fitting that it
connects to. See page 21.
Cause: Outer tubing surface finish not smooth. Correction: Remove tube from connection. Remove problem area by cutting
tube to shorter length. Re-insert in connection. See page 14.
If removing the drain line, leave in place the elbow fitting that it
connects to. See page 21.
Questions? Call The Kenmore Water Line 1-800-426-9345 or visit KenmoreWater.com
25