Filter
Top Products
Machine Settings
When you press the SET key, the following four mode keys
will be displayed and you can customize settings within
each mode. You can select your desired mode by pressing
the corresponding key.
Common set mode
In this mode, machine operation and function (screen
contrast, beep sound, etc.) can be adjusted and set for
both embroidery and conventional sewing.
Conventional sewing set mode
In this mode, free-arm length can be adjusted and set.
Embroidery set mode
In this mode, sewing function for embroidery can be
adjusted and set.
Flag mode-language selection
In this mode, you can select one of 3 languages for the
visual touch screen.
S
Mode
Common Set Mode
In this mode you can set the following machine functions,
which are applicable to both embroidery and conventional
sewing.
Screen contrast
The visual screen contrast can be adjusted. Press the +
key, to sharpen the screen color contrast.
Press the c key, to fade the screen color contrast.
Sound control
The buzzer volume can be adjusted. The volume level
can be set from 0 to 10. The default setting is 5.
Sewing light
The dual sewing lights can be individually set "On" or
"Off" depending upon your sewing needs.
Press _ key _ to light up the needle plate area.
Press key _ to light up the free arm area.
When both lamps are "On" it provides a well-tit sewing
area.
ECOmode
After turning on the power switch, if you have not used
the machine for a set period of time, the machine will
enter Eco mode. The visual touch screen will go dark
and the sewing lights will turn off.
Whenever you touch the screen while the machine is in
Eco mode, the screen and sewing lights will turn on
again.
Page key
You can turn the pages by pressing the page key.
Press key to view the next page.
Press key to view the previous page.
Register key
Press _i#!ii_fkey to register the new setting and to exit the
common set mode.
_) Return key
Press _ key to exit the common set mode without
registering the new setting.
J
J
2O