Filter
Top Products
t
Turning a Square Corner
Stop stitching at the corner of the fabric,
Lower the needle by turning the handwheel
counterclockwise,,
Raise the presser foot and turn the fabric
counterclockwise 90°,,
Lower the presser foot and begin stitching in
the new direction,
/
©
Basic Zigzag
Stitchseiector: F,G,H / _
Needle thread tension: 2 to 5
The zigzag stitch is one of the most common
and versatile stitches,
It can be a utility stitch for hemming, over-
casting, mending and darning
It can also be used for appliques or as a
decorative stitch,
Select a pattern, which is suited for your
sewing needs from the 3 patterns available
Overcasting with zigzag stitch
Stitch selector: G, H
Needle thread tension: 2 to 5
Finish raw edge of the fabric to prevent it
from ravelling_
Start overcasting about 1/8"(0_3 cm) inside
the raw edge of the fabric,
The stitches on the right should just clear the
fabric edger
26