Kenmore 251.907Q1 Dehumidifier User Manual


 
OBSERVE
ALL LOCAL
CODES AND
ORDINANCES.
DO NOT,
UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER
SUPPLY CORD
GROUND
PRONG.
ELECTRICAL
GROUND
IS
REQUIRED
ON
THIS
APPLIANCE.
A 115-VOLT
60H2,
AC
ONLY 15A
FUSED AND PROPERLY
GROUNDED
ELECTRICAL
SUPPLY IS REQUIRED.
A
time delay fuse or time delay
circuit
breaker is recommended.
Use a dedicated
circuit serving
only
this
appliance.
RECOMMENDED
GROUNDING METHOD
For
your personal
safety, this
appliance
must
be
grounded.
This
appliance has
a
power
supply cord with
a 3-prong
grounded
plug.
To minimize
possible
shock hazard,
the cord must
be
plugged
into
a
matching
grounded
electrical
outlet that complies with
the latest edition
of the National Electrical
Code and
all
local
codes and
ordinances.
lf a
grounded
3-prong electrical
outlet
is
not
available,
it is the
personal
responsibility
and
obligation of the customer
to
have
one
installed
by a
qualified
electrician.
3-prong
grounded
plug
Power
suiply cord
Grounded
3-prong
electrical outlet
ELECTRICAL
SHOCK HAZARD
Plug
into a
grounded
3-prong outlet.
.
Do not remove
ground prong.
.
Do not
use a two-prong
adapter.
.
Do not
use an extension
cord.
Failure
to
follow
these instructions
can result
in death, fire
or electrical
shock.
A
WARNING
)*
DO NOT
USE
AN EXTENSION
CORD.
A
WARNING
To reduce the risk of fire,
electric shock or
injury
to
persons,
read the important
SAFETY INSTRUCTIONS
found on
page
3 before operating this
appliance.
.
Install
the dehumidifier on a level floor
strong enough to support the
unit
with
a
full
bucket of water.
.
For
best
performance,
allow at least 12-
18 inches of air
space on all sides of the
unit for
good
air circulation.
.
Keep all outside
doors,
windows
and
other
openings closed
when
operating the
dehumidifier. Humid
outdoor air will add to
the unit's workload.
.
Leave the
dehumidifier
in
an upright
position
for
30 minutes before turning
on.
AUTO RESTART
This dehumidifier features
AUTO RESTART
which
will
power
the machine
back on
and
remember the
previous
settings in the
event
of a
power
failure. This feature functions
automatically.
DEFROST
OPERATION
The
dehumidifier has
a built-in defrost
control that
senses frost buildup
on the
evaporator
coils.
During defrosting,
the compressor will
automatically turn
off; the fan will
continue
running
to defrost the
coils.