Filter
Top Products
WARNING
Electrical Shock and Personal
Injury Hazard
Disconnect electrical supply
before servicing or cleaning the
unit. Failure to do so could result
in electrical shock or personal
injury from vacuum cleaner sud-
denly starting.
TO REMOVE LIGHT BULB
1. Disconnect power cord from eleclrical outlet
2. Press handle release pedal and lay
vacuum cleaner back.
3. Grasp the edge of the exhaust cover.
Pull out edges of exhaust cover and lift off,
4, Remove the two (2) screws from the
lens cover.
CAUTION
Do not use a bulb rated over 9W
(13V). During extended use, heat
from the bulb could overheat
surrounding plastic parts.
5. Insert fiat blade of
screwdriver into slot at
top of the lens.Lift the
lens cover to remove.
6. Pull bulb out of socketo
Do NOT twist. Gently
push replacement bulb
into socket to replace°
7. Snap lens cover back
into place and secure
the headlight lens by
replacing the two screws°
Replace exhaust cover,
Note: See separate PARTS LIST for bulb
number.
1. Locate the lower intake hose.
2. Rotate lower intake hose cuff clockwise
into the unlock position°
3, Disconnect the hose by
pulling down on the lower
intake hose cuff.
4. Remove debris from
inside the hose.
1. Follow instructions on page 13 for
removing nozzle guard and brushrolL
2. Once brushroll is
removed, locate the
nozzle valve_
-"_"_L,_._.'__ A
3. Remove debris from inside the nozzle
valve.
4. Return brushroll and nozzle guard,
t4