Filter
Top Products
CANISTER
1oOpen the canister hood°
2. Check to see that the dust bag is proper-
ly installed, See BAG CHANGING for
instructions,
3. Check to see that the motor safety filter is
properly installed. See MOTOR SAFETY
FILTER CLEANING for instructions.
HOOD
It is normal for the canister hood to come off
when opened further than needed. Line up
the hinges, insert them, and close the hood
to replace it,
HOSE
Notch
1oLine up the
hose latch tab
and notch in
canister hood
and insert hose
into canister until
it snaps in place,.
To remove: lift
hose latch tab
upward and pull
up on hose.
Hat
Handle
Button
Handle
Quick
Release
(Some
2. Insert
handle into
wand until
lock button
snaps in
place° Be
sure hose
is not
twisted.
To remove:
press han-
dle release
button and
pull up on
handle°
To store: Disconnect hose from wands and
canister to prevent stress on hose during
storage, Store hose in a loosely coiled
position so the hose covering is not
stressed.
HOOE
Attachment
Storage
Cover
Canister
Performance
indicator Light
(Some Models)
Performance
Indicator
(Some Models)
Dust Bag