Filter
Top Products
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cteaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
U'll III '1 IIII I'1
TO CHECK BRUSHES:
whenb ushes
are worn to the
level of the base
support bars,
replace thebrush dowel
Base Support Bars
TO REPLACE BRUSH DOWEL:
1. Remove POWER-MATE TM cover, belt and
brush assembly° See "To remove belt" in
BELT CHANGING AND BRUSH
CLEANING..
2. Remove brush supports, washers,
screws, end brush, brush sprocket pieces
from ends of brush assembly.
3o Reassemble brush assembly. To line up
screw holes in dowel, sprocket and end
brush, be sure the brush portion of end
brush lines up with brushes on brush dowel
4. Replace belt, brush assembly, POWER*
MATE TM cover, light bulb and light cover. See
"To replace belt" in BELT CHANGING AND
BRUSH CLEANING..
Washer
Brush
Support
Brushes
Brush Dowel
Brush
Sprocket
Flange
Brush
Sprocket
End
Brush Brush
Support
Screw
Screw
Washer
16