Filter
Top Products
BUTTONHOLES
(Model t654)
Use disc # 1
Stitch width knob- about 1
Feed dog control- Left
Cover plate for buttonhotes
0
_[uidepinhol!
_ pinL0__ear
0
Remove regular cover plate and
insert buttonhole cover plate,
24
Screw guide pin on guide plate into
guide pin hole on machine bed.
Select desired size of buttonhole by
turning disc as shown above.
Length of buttonhole appears in
window on top s{de of guide plate.
Pull guide plate all the way for-
ward so that guide pin is at S.
This will enable you to start at
one end of the buttonhole,
Screw guide pin on guide ptate
into guide pin hole on machine
bed.
Drop guide plate into place with
template fitting over the pinion
gear.