Filter
Top Products
Materials Needed
To simplify the installation Sears has available the installation parts shown below. You may or may not need al! of these materials,
depending on your type of installation.
WATER HEATER INSTALLATION Kr WRTH
FLEXmBLE CONNECTORS FOR 3/4" OR 112"
THREADED OR COPPER PLUMBING
EXPANSION TANKS FOR THERMAL
EXPANSION CONDmONS AVAmLABLE _N2
GALLONS _AND 5 GALLONS CAPACITY
THROUGH LOCAL SEARS STORE OR
SERVICE CENTER.
,/ / j
DRARN PANS AVABLABLE IN 20"
DIAMETER FORWATER HEATERS
NAWNG A DIAM ETER 18" OR LESS,
24" DRAMETER FOR WATER
HEATERS HAWNG A DBAMETER 22"
OR LESS AND AVABLABLE IN 28"
DBAMETER FOR WATER HEATERS
HAVING A DBAMETER 20" OR LESS,
Basic Too_s
You may or may not need al! of these tools, depending on your
type of installation, These tools can be purchased at your local
Sears store,
Pipe Wrench (2)
Screwdriver
6 Foot'rape or Folding Rume
Garden Hose
DriH
Pipe Dope or Teflon .rape
DRILL
ROLL OF TEFLON TAPE (USE ON
WATER CONNECTIONS)
PIPE DOPE (SQUEEZE TUBE)
USE FOR WATER CONNECTIONS
GARDEN HOSE 6 FOOTTAPE
SLOT-HEADSCREWDRIVER
PHLLIPS SCREWDRIVER
PIPE WRENCH
Additiona_ Too_s Needed When Sweat
So_dering
Tubing Cutters or Hacksaw
Propane Torch
Soft Solder
Solder Flux
Emery Cloth
Wire Brushes
TUBING CUTTER
1
PROPANE
TORCH
ROLL OF
EMERYCLOTH
HACKSAW
ROLL OF
LEAD-FREE
SOFT SOLDER
314" (19 ram}WIRE BRUSH
1/2" (13 ram) WiRE BRUSH
SOLDER
FLUX