Filter
Top Products
r Ill
Make the Buttonhole
1. a,
b.
C.
d.
Mark your buttonhole position carefully
on the garment.
Insert your garment between the guide
plate and the presser foot.
Pierce the fabric with the needle at the
far end of the buttonhole.
Line up your fabric edge with the
measurement markings on the far end
of the guide plate.
NOTE: If you want your buttonhole to be
1/2 inch from the garment edge, line
up the fabric with the 1/2 inch
markings each time you start to sew a
buttonhole.
2. a. Lower the presser foot.
b. Start sewing slowly.
c. Allow the machine to do the work by
itself. (Do not try to guide the fabric.)
d. Stop sewing when the needle returns to
the position where it begins.
3. Release the buttonhole adapter by pushing
down and pulling the lock lever.
['
You may alter the closeness of the stitches by turning the density control knob on
the buttonhole adapter.
a. Toward you for more density.
b. Away from you for less density. _,_w_.,t_t,w:.,t,,:,,t,.i__wt_"_;w;_w;A""'v'v_
Stitch density
control knob
More
density
53