Filter
Top Products
TOREPLACEDUSTBINLID
Replace dust bin lid assembfy by placing
back on dust bin with marks on the lid
aligned as shown under Open (For
Emptying) on the back of the dust bin.
Turn This Direction
To Close For Use Open
Closed
(For Use)
Rotate clockwise while pressing downward
so marks align as shown above Closed
(For Use).
Insert dust bin
into vacuum
cleaner,
Lower the dust
bin handle to Handle
lock dust bin in
place
A noticeable
"click" should
be heard°
The HEPA exhaust filter must be replaced
when dirty., It should be replaced regularly
depending on use conditions
The filter CANNOT be washed as it will
lose its dust trapping ability.
Note: See PARTS AND FEATURES
for the exhaust filter number,
Remove exhaust filter cover by pressing
the release tab on the cover and rotating
out from vacuum cleaner
Filter
Cover
Remove
the filter
cartridge
from cove_
Place new filter cartridge into cover making
sure that airflow arrow on side of cartridge
points into cover,
19
Place the foam seal of the filter should
be placed against the vacuum cleaner
body.
Seal Against Exhaust
Vacuum Cleaner Filter
Body Cover
Filter
Replace the exhaust filter cover by placing
bottom tabs in slots and rotating in until
cover snaps into place.