Filter
Top Products
Brush
Carrying
Tool
Extension
Wand
Extension Hose
Release Lever
TO USE ATTACHMENTS
Remove the lower end of the extension
hose from the wand holder by grasping the
hose collar, twisting, and pulling straight up.
Rotate the extension hose release lever
down if maximum reach is needed,
Note: The motor protector may open when
using attachments or when cleaning new
carpet, due to reduced airflow caused by the
attachments themselves or caused by new
carpet lint filling the dust bin quickly, See
the TROUBLESHOOTING section_
, i ,i,iiiiiii i i,
IbWARNING
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before ser-
vicing or cleaning the vacuum cleaner.
Failure to do so could result in electrica!
shock or personal injury from vacuum
cleaner suddenly starting°
...................... ii
TELESCOPIC WAND WITH
SUCTION CONTROL SLIDE
1_Remove the lower end of the extension
hose from the wand holder by grasping
the hose collar, twisting, and pulling
straight up.
2. Remove the telescopic wand from the
wand holder.
3. Remove the crevice toot from its stor-
age position in the wand. Turn the lock-
ing ring to the UNLOCK position.
Crevice
Tool
Wand
t
1.Hose
Collar
Wand
Holder
11