Kenmore 116.34723 Vacuum Cleaner User Manual


 
Unplug power cord from wall outlet. Clean
exterior using a clean, soft cloth that has
been dipped in a solution of mild liquid
detergent and water and wrung dry.
DO NOT drip water on cleaner and wipe
dry after cleaning.
DO NOT clean tools in dishwasher or
clothes washer. Wash tools in warm soapy
water, rinse and air dry.
DO NOT use tools if they are wet.
The hose located on the vacuum cleaner
carries the dirt from the nozzle up to the
dust bin. If the hose should become
clogged:
Suction Inlet-_
Hose Inlet--_ i __
Hose
ing
Unplug vacuum. Remove hose coupling
and check hose coupling and hose inlet for
clogs. Check suction inlet and secondary
filter screen for clogs.
U
oonooo,or
J _ _ Pipe
_ Hose
Disconnect wand from connector pipe and
nozzle hose, check the wand and hose.
Plug in vacuum cleaner and turn on.
Disconnect wand and stretch hose in and
out to remove clog. If clog still exists, turn
vacuum cleaner OFF and UNPLUG
POWER CORD. Turn vacuum over and
inspect agitator area for clogs.
17