Filter
Top Products
Electrical Shock And Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
Replace belt whenever a burning rubber
smell caused by excessive slippage
occurs°
CAUTION
BELT AND MOTOR SHAFT
MAY BE HOT!
Make sure the vacuum has complete-
ly cooled prior to replacing belt.
To remove the belt cover, depress the tab
and lift off. Remove worn or broken belt.
Place CARPET/FLOOR selector in the
BARE FLOOR position,
Loop new belt
around the motor
shaft. Hold the
inside of the belt
against the top of
the large pulley
and rotate the
pulley cloc .kwise
until the belt is
completely on the
pulley.
Note: See PARTS AND FEATURES for
belt number_
Rotate the pulley and the motor shaft to
ensure that belt is not twisted or pinched°
Tab
Large
Pulley Belt
Reinstall belt cover and securely snap into
place.
DO NOT operate cleaner without belt
cover in place,
21