Filter
Top Products
TO STORE ATTACHMENTS:
Remove dusting brush or combination
brush. Snap into appropriate storage roca-
tion.
Remove crevice tool from the wand by twist-
ing. Lay aside.
Remove the extension wand from the hose.
Twist the wand to the left and pull from the
hose end.
Lower
Lock
Locking
Ring
Upper
Wand
[tl_l_:k tho wand by Itlrrling tho wzmd lock
=ng ring to the UNLOCK position.
Slide the lower wand into tbe upper wand.
Turn the wand locking ring to the LOCK
position.
Place 111ocrevice tooldown into Ihe com-
pressed wand. Snap into the appropriate
storage location.
Reinsert the hose fully into the opening on
the lower body from which it was removed.
Press firmly to assure connection
CAUTION
NOT pull the vacuum cleaner
nd the room by the hose.
perry damage could result.
EXTENSION HOSE:
SOME MODELS
Some rnoders include an extra hose which
connects to the stretch hose on the vacuum
for a longercleaning reach,
Unit Hose _ Extension Hose
Insert the two tabs on the end of the
extension hose into the two "J" shaped slots
on the unit hose and twist to connect.
All attachments and the telescopingwand
can be attached to the open end of the
hose.
FLOOR BRUSH AND WAND:
SOME MODELS
Some models have an extra brush and wand
for cleaning bare floors. Twist one end of the
aduplor Inlo tho Iloor brush and Iho olhor
end ialo the straight wand. Connect Ihe
straight wand to the telescopic wand and
then to the vacuum hose or extension bose.
I
Adaptor J _
CAUTION
When using the regular hose or with
the extension hose attached, the
cleaner should be on a solid surface
on the same level or below the level
of the user's feet, DO NOT use the
hoses when the cleaner is above the
level of the user's feet.
CLEANING AREA
ATTACHMENT
DUS_NG BRUSH _"_
CREVICETOOL
COMBINATION BRUSH
"Alwaysdeana_achmentsbeforeuslngonfabrics.
Furniture*
X
X
X
x
Drapes*
X
X
Stairs
X
X
Walls
x
10