Filter
Top Products
Constantgreenlighton
indirtsensor_
No green or red dirt
sensor lights°
Performance Indicator
activates_
Vacuumcleaner picks
up moveablerugs-or-
PowerMatepushestoo
hard.
Red light on
PowerMate.
Cord won't rewind_
Vacuum cleaner leaves
marks on carpet.
1. Dirt passage isclogged,
2, Lensesare dirty
1. No powerto sensor board,
1. Fullor clogged dust bag
2. Dirty filters°
3o Blockedairflow passage,
4. Certain attachment tools,
1, Wrong pile height setting_
2, Suction too strong
1o Trippedoverload protector in
PowerMate
1_ Dirty powercord
2, Cord jammed_
1o Wrong vacuuming pattern,
I. Check forclogs inair passages
2, Clean lenses,
1. Taketo your nearest Sears Service
Center,
1o Change bag,
2o Changefilters,
3. Clear blockagefromairflow passage,
4. This is normal, Lightshould go off
when tool isremoved.
t, Adjust setting,
2oSelect lowerPowerLevel
Removeany itemsthat may be
caught or jammed,then reset If
vacuumcleaner starts and stops
again,clean agitator and end caps,
then reset.
1. Clean the powercord,
2. Pull out cord and rewind,
I. See VACUUMINGTIPS,
23