Filter
Top Products
RFORI
PER INDICATOR
WARNING
Personal Injury Hazard
AIways turn off and unplug the vacuum
cleaner before cleaning the agitator area
as agitator may suddenly restart.
Failure to do so can result in personal
injury.
OVERLOAD PROTECTOR
The PowerMate
has built-in
protection against
motor and belt
damage should
the agitator jam If
the agitator slows
down or stops, the
overload protector
shuts off the
PowerMate and
the red light will come onoThe canister
motor will continue to run.
Overload Protector/
Belt Reset
To correct problem: Turn off and unplug
vacuum cleaner, remove obstruction, then
press BELT RESET button,
if the problem persists, have the
vacuum cleaner serviced by a Sears or
other qualified service agent.
EDGE CLEANER
Active brush edge
cleaners are on both
sides of the
PowerMate. Guide
either side of the
PowerMate along
base-boards or next
to furniture to help
remove dirt trapped
at carpet edges.
vacuum
running
al airflow,
on the
_ance
off, The
)mes on
the
becomes blocked. If that occurs,
the disposable dust bag, motor
filter and other possible clog
shown in HOW YOUR VACUUM
CLEANER WORKS.
To
SHOOTING t Lble,
See the TROUBLE-
light may come on when using
due to reduced airflow
attachment
PROTECTOR
i vacuum cleaner has a thermal
automatically tripsto protect
vacuum cleaner from overheating, If a
og prevents the normal flow of air to the
the thermal protector turns the
motor off automatically. This allows the
motor to cool in order to prevent possible
damage to the vacuum cleaner.
To correct problem: Turn off and unplug
vacuum cleaner to allow the vacuum
cleaner to cool and the thermal protector
Check for and remove clogs, if
Also check and replace any
led filters. WaLtapproximately
irty (30) minutes and plug the vacuum
cleaner in and turn back on to see if the
motor protector has reset,
14