Filter
Top Products
1. Remove Power_Mate ® cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section_
Push in
And Turn
2, Push in and turn
bulb counterclock-
wise, then pull out
to remove,
_ Push In
And Turn
3_ Push in and turn
bulb clockwise, to
replace. Bulb must
_. not be higher than
_15 Watts(130 Volts),,
4. Reinstall Power-Mate e cover as shown in
BELT CHANGING AND AGITATOR
CLEANING section.
NOTE: See PARTS AND FEATURES for
bulb number,
WARNING
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before per-
forming maintenance to the vacuum
cleaner. Failure to do so could result in
electrical shock or personal injury from
vacuum cleaner suddenly starting.
TO CHECKTHE BRUSHES
_:z:::__ When brushes
levei of the base
support bars,
replace the
agitator
Base Support Bars assembly,
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate s cover, belt and
agitator assembly See "To Remove Belt" in
BELT CHANGING AND AGITATOR
CLEANING..
2, Replace agitator assembly.
3. Reinstall belt and Power-Mate® cover.
See "To replace belt" in BELT CHANGING
AND AGITATOR CLEANING.
20