Filter
Top Products
English 15
1Nut
2 Tool
Î Unscrew the nut in the clockwise direc-
tion using the enclosed tool.
Î Remove the washer.
Î Place the pad on the centre of the driving
plate and press it slightly.
Î Install the washer.
Î Screw the nut in the anti-clockwise direc-
tion and tighten it using the enclosed
tool.
Î Remove the tool.
Î Tilt the appliance forward.
ƽ Danger
Risk of injury on account of the rotating pad.
Do not bring your hands and feet anywhere
close to the rotating pads.
Î Pull the lever for level adjustment.
Î Tilt the handle into a comfortable posi-
tion.
Î Release the lever for level adjustment.
Î Park the handle in vertical position.
Î Tilt the appliance backwards and drive it
to the place of use.
ṇ Warning
Risk of damage to the floor covering. Do not
operate the appliance on the spot.
Do not use the appliance when no pad is
mounted.
Î Swivel bottom cable hook upward and
remove the cable completely from the
appliance.
Î Insert the mains plug into a socket.
The indicator lamp "main power" will illu-
minate.
Î Set handle to working height.
Note
The appliance cannot be switched on while
the handle is in the upright position.
Î Hold the handle with both hands.
Î Press the left or right release and hold it.
Î Press the switch on the same side - the
appliance starts.
Î Release unlocking mechanism.
Î Move the appliance forward and back-
ward over the surface to be processed.
Î Release the switch to interrupt opera-
tion.
Î Release the switch.
Î Disconnect the mains plug from the
socket.
Î Pull the lever for level adjustment and
bring the handle in a vertical position.
Î Swivel the cable hook toward the bottom
and wind the cable between the handle
and the cable hook.
Î Tilt the appliance backward and store it
on the handle.
Î Remove the pad.
Î Tilt the appliance forward.
Î Clean the casing with a damp cloth.
Î Store the appliance in a dry room.
Operation
Adjust handle
Transport
Turning on the Appliance
Shutting down