Filter
Top Products
8
inner chamber. Pull the plastic filter holder
upward to remove. Remove foam filter
from holder.
HEPA and Micro dust filter
Replacing the micro dust filter (models
KVC11 & 12) or HEPA filter (models
KVC15 &16) - Remove the filter cover at
the top rear of the vacuum by pulling up
on the back tab. Remove the filter from
the cover (KVC11) or remove from
cavity (KVC12/15/16),
Above: KVC12/15/16 Below: KVC11
Attaching the carry strap (KVC11)
Unclasp the attachment clip and thread
the flat edged piece through the carrying
handle, clip the two ends together.
Ensure that the strap has no twists and
connect the strap to the other end of the
unit by taking the two metal clips on the
strap and connect them to the two strap
connection tabs.
When attaching the clips connect from
underneath the tab.
KVC11
Filter holder
Removable foam filter
Strap connection tabs