Filter
Top Products
107351-01C
Assembly
INSTALLING NOSE CONE GUARD
IMPORTANT: THIS IS NOT TO BE USED AS A
HANDLE.
(For T70 Model Only)
This model is furnished with a nose cone guard (A).
Nose cone guard and mounting screws are found in
the shipping carton.
1. Place nose cone guard on top of upper shell
flange (B). Make sure nose cone guard is on hot air
outlet end of heater (C).
2. Insert screws through nose cone guard and
upper shell flange.
3. Tighten screws firmly.
4. Assemble wheels and handles per the instruc-
tions that follow.
UNPACK COMPONENTS
Remove components from shipping carton and
check for damaged or missing parts.
Model T70 Only
A - Axle, Hardware, B - Heater D - Wheel Support Frame E - Rear Handle
and Wheels C - Front Handle
21
B
E
A
D
C
A
C
B