John Deere AC-155LP Electric Heater User Manual


 
16 Operator’s Manual
Service
MAINTENANCE:
WARNING: TO AVOID RISK OF BURN AND
ELECTRICAL SHOCK, NEVER ATTEMPT
TO SERVICE SPACE HEATER WHILE IT IS
PLUGGED IN, OPERATING, OR HOT.
KEEP HEATER CLEAR AND FREE FROM
COMBUSTIBLE MATERIALS, GASOLINE AND
OTHER FLAMMABLE VAPORS AND LIQUIDS
DO NOT BLOCK THE FLOW OF COMBUSTION
OR VENTILATION AIR.
1. Keep heater clean. Clean heater annually or as
needed to remove dust and debris. If heater is dirty or
dusty, clean heater with a damp cloth. Use household
cleaners on difficult spots.
2. Inspect heater before each use. Check connections
for leaks. Apply mixture of liquid soap and water to
connections. Bubbles forming show a leak. Correct
all leaks at once.
3. Inspect hose / regulator assembly before each use. If
hose is highly worn or cut, replace with hose specified
by manufacturer.
4. Have heater inspected yearly by a qualified service
agency.
5. Keep inside of heater free from combustible and
foreign objects. Remove motor and other internal parts
if needed to clean inside of heater.
6. Clean fan blades each season or as needed.
WARNING: NEVER SERVICE HEATER WHILE
IT IS PLUGGED IN, CONNECTED TO
PR OPAN E SUP PLY, OPE RATI NG OR
HOT. SEVERE BURNS AND ELECTRICAL
SHOCK CAN OCCUR.
UPPER SHELL REMOVAL:
1. Remove screws along each side of heater using 5/16"
nut-driver. These screws attach upper and lower shells
together. (Fig. 3)
2. Lift or slide upper shell off.
3. Remove fan guard.
(Fig. 3)