Filter
Top Products
7
cannot be on the same channel or the signals will
cancel out.
Multi-Camera Operation
This wireless surveillance system is designed to
work with up to 2 cameras. Additional cameras are
sold separately. IMPORTANT: When using more
than one camera, each camera must be assigned
to a specifi c channel using the channel selection
switch located on the underside of the camera
housing. Select either 1 or 2 for each camera. Each
camera must be assigned to a specifi c channel;
both cameras cannot be on the same channel or
the signals will cancel out. If using only one camera
you can select either Ch 1 or Ch 2, whichever
provides the best picture. The slide switch located
on the rear of the Receiver must be set to refl ect the
channels in use.
CAMERA 1
Channel Setting
CAMERA 2
Channel Setting
RECEIVER
Channel Setting
1 2
1 2
1 2 1/2