Filter
Top Products
6
plug to the yellow VIDEO IN jack and the white plug
to the white AUDIO IN jack.
2. Plug the AC adapter into the power jack (marked
on the back of the receiver, then into an AC outlet.
3. Loosen the antenna nut and rotate the antenna
to a vertical position. Tighten antenna nut so it is
snug. Do not over-tighten. Place the receiver either
on top or near to your TV.
4. Set your TV to monitor the VIDEO INPUT
designated for the Receiver.
CHANNEL SELECTION
Manual Mode
To select one of the two
channels manually,
press the MANUAL button
on the top panel of the
Monitor. The green LED
will light for the
corresponding channel.
The receiver will switch to a
different channel (1 or 2)
each time the MANUAL button
is pressed. When you have
selected the channel with the
active camera, that video will
appear on the monitor/TV screen.
Each camera must be assigned to
a specifi c channel; both cameras
Auto
Manual
Channel
Selection
switch
1 2