Janome DC 3050 Sewing Machine User Manual


 
33
Patchwork
Machine Settings
q Pattern: #34 or #38
w Presser foot: Satin stitch foot F
Applique Sewing
Place the applique on the fabric and baste it in
place. Sew, guiding the edge of the applique along
the slit on the foot, so that the needle falls off the
edge of the applique when it swings to the right.
NOTE:
When changing the sewing direction at a corner or
curve, lower the needle into the applique at the left
swing and turn the fabric to a new direction.
Sew the seam with straight stitch and press seam
allowance to open. Sew pattern #34 or #38 on the
right side of garment centering over the seam line.
Machine Settings
q Pattern: #28 to #31
w Presser foot: Satin stitch foot F
q
w
qw
Scallop Stitch
Machine Settings
q Pattern: #33
w Presser foot: Zigzag foot A
Starting to sew
Sew the stitches approximately 3/8” (1 cm) inside
of the edge of fabric.
Trim the outside of the stitches as shown.
* Make sure you don’t cut the thread.
qw