Filter
Top Products
5
6
7
Auto
3
Step1
R
Sew to length
required, then press " ".
Step2
Sew up to start
position, then press " ".
Auto
3
R
Step3
Machine stops when
BH is completed.
Auto
3
R
Restart for the same size.
Different size
Cancel
Step-1
Sew up the left side until the end of the buttonhole
mark. Then press the Reverse Button.
5 Required Length
6 Reverse Button
Step-2
Depress the Foot Control. The machine will
automatically tack and sew down the right side of the
buttonhole.
Stop the machine when you are directly opposite the
Starting Point.
Press the Reverse button.
7 Starting Point
Step-3
Keep the Foot Control depressed. The machine will
bartack, lock the stitches and automatically stop when
the buttonhole is completed.
To make the next buttonhole, position the fabric and
step down on the Foot Control.
To sew the next button hole in a different size press
the Cancel button.
NOTE:
The MC 9700 will sew another buttonhole identical to
the first one each time you step down on the Foot
Control.
To cut the buttonhole opening, refer to the instructions
on page 45.
49