iRobot 430 Vacuum Cleaner User Manual


 
For more detailed information, visit: www.irobot.com
Remote Control (optional accessory)
The Remote Control lets you conveniently control Roomba’s functions.
You can use it to turn Roomba on and off, and steer it around your
room without bending down. It also gives you remote access to these
commands:
Directional
Buttons
SPOT
Button
CLEAN/Power
Button
. . .
TIP: Check that there is a direct line of sight from the Remote Control to
Roomba and that the
remote is pointed at Roomba.
The Remote Control and Virtual Walls operate using an invisible infrared
beam. If they a
re all used in the same area, Roomba may see multiple
infra
red signals and will not operate. The Remote WILL NOT work when
Roomba is near
Virtual Walls.
Before using your remote for the first time, install 2 AA batteries (not
included).
SPOT
Roomba spirals approximately three
feet in diameter and then spirals back
to whe
re it started, intensely cleaning a
local a
rea.
CLEAN
Roomba automatically calculates the
room size and adjusts its cleaning time
app
ropriately.
. . .
Models 430-519 Roomba enters Spot
mode.
Models 520-599 Roomba attempts to
Dock on the Home
Base, if p
resent.
Models 600+ Roomba enters Max
mode and cleans
until the battery is
discharged.
. . .
Button