Filter
Top Products
6
7
101M
Before using your Therapure
®
101 air purifier, please read the following important information.
Electrical Ratings:
120V Setting: 120Vac, 60 Hz
Power consumption: 38 watts at high fan speed,
3 watt UV light bulb
Net weight: 6.5 lbs.
Dimension (LxWxH): 10” x 7.5” x 16”
Replacement Parts:
Lamp – TPP1010
Filter – TPP1011
Controls/Settings
There is an OFF button and a Speed Knob on the Control Panel. Just turn the Speed Knob
to the setting you want.
OFF –turns unit off.
LOW –at this setting, the unit will run at low speed.
MED –at this setting the unit will run at medium speed.
HI –at this setting the unit will run at high speed.
Press the UV lamp button to turn on the UV lamp to kill harmful airborne
bacteria and germs. Press it again to turn off the UV lamp.
Safety
1. Do not blow air directly into air purifier.
2. Keep both sides of the unit at least 1 foot away from a wall.
3 Do not place the unit near curtains.
4. Placing the unit close to the source of air pollution is an effective way to improve
indoor air quality.
Locate a level surface on which to place your Therapure
®
101 air purifier and a 120V outlet (follow
warnings in the “SAFETY INSTRUCTIONS”, “IMPORTANT WARNINGS” sections of this manual).
Position your Therapure
®
at least one foot (12 inches) from the wall. Plug in the unit. You are now
ready to turn on your Therapure
®
101 air purifier!
1. 2.
3. 4.