Filter
Top Products
Deck Plate
Mounting Gasket
Property Damage: Do not pinch or break copper
tubing. Do not distort the last 1 inch of tubing.
2
■■
Unpack faucet components.
■■
On a firm, flat surface, carefully
straighten the copper tubing.
A
C
D
INSTALLING THE FAUCET
5
■■ Slide plastic mounting gasket over
all tubes descending from faucet
body and seat mounting gasket into
bottom of faucet until flush.
■■ Position supplied deck plate over
the hole into which the faucet will
be installed.
■■ With mounting gasket in place, feed
tubes down into hole until faucet
rests on deck plate (see illustration).
B
■■ From under the sink, place the
metal mounting plate onto the
threaded stud.
■■ Make sure faucet head is at the
desired angle.
■■ Place the supplied lock washer and
hex nut on to the threaded stud.
■■ Tighten to secure the faucet to the
sink top. Do not overtighen.